INKING
SYSTEM
The traditional ink fountain is replaced by a two-roller system that
continuously mills the ink. Simple ink adjustments are made electronically
from the micro-processor control pad. Each form roller has its own
oscillator roller to ensure a uniform flow of ink. Once adjusted,
this unique setup requires little or no operator intervention.
COMMON IMPRESSION
CYLINDER
The common impression cylinder holds the press sheet with the same
set of grippers for offset printing and numbering, ensuring positive
registration between offset printing, gothic numbering and MICR
encoding.
PROGRAMMABLE
CONTROLS
The microprocessor control system operates the press through a selected
sequence. The system will automatically control numbering, non-numbering
and indexing cycles.
CHECK DISCRIMINATOR
A photoelectric check/deposit slip discriminator reads a code in
the margin of each sheet to identify checks. The numbering unit
automatically lifts off impression while the press prints deposit
slips.
QUICK-CHANGE
PLATE SYSTEM
The press can be programmed to automatically stop at the end of
a run for a plate change. This function includes a stop-at-home
feature that causes the plate cylinder to stop in the exact location
required to hang the next plate. This feature, coupled with the
unique foot operated plate clamp allows the operator to mount and
position a plate in seconds.
SYSTEMS INTEGRATION
Heath Custom Press has the knowledge and ability to completely supply
a start-up check facility with all major components. We can supply
everything from front end systems to platesetters, presses, paper
cutters and check binding, stitching and trimming equepment. We
even supply the plate material and ink.
|
